I increased the fertigation events from twice a day to three times a day, to speed up growth. I've completed all the toppings needed for the mainline training and each plant has only eight branches/stems. The plants have grown some massive leaves but the stems are still pretty small. So the question is when to flip to flower.
Gelato is a little ahead of the others, but still with only three nodes on her eight stems.
The other three plants have about one or two nodes on their eight stems.
The Kush plant seems to be lopsided in her growth. She's the plant that had major nitrogen overload and was stunted for a bit. The lopsided issue might be the position of the light.
All four plants have healthy roots that are peaking through the air pots. I've never had so many roots peak through.
I'm thinking I'll give the plants a few more days so they all have at least three nodes before I flip to flower. I am notorious for flipping too late and the plants get out of control during the stretch.
Not sure how to prune these plants either, since I did the mainline training. They don't have much undergrowth and they won't have any unnecessary branches. I will probably have to take off some of the bottom fan leaves when they are about two weeks in to flower. Dr. Coco had a great tutorial on how to get the mainline toppings done, but I feel like I'm just guessing on how to proceed now.
Did more plant training today. The mainlines are looking good. My plants are struggling a little though. I had the inflow EC at 850-950 because Kush was so overloaded with nitrogen. Plus, the CBD plant had started showing signs excess nitrogen so I figured they all needed less nutes. I think it was too little for too long. I'm bumping the nutes back up and will aim for 1050-1100 and see how they do. Man, growing cannabis is a constant challenge...keeps the brain sharp though.
The Kush plant still has curled fan leaves and her new growth is slow, curly and weak. Not sure what went so wrong with her since the other plants didn't react so extremely to the early-mid veg nutes. I followed Dr. Coco's nutes guide. I followed the same guide for the auto I grew last cycle and that plant did great (I got five ounces from her!).
Here's some shots of the mailines
Can't wait til they get flipped to flower and really take off.
Did more plant training today. The mainlines are looking good. My plants are struggling a little though. I had the inflow EC at 850-950 because Kush was so overloaded with nitrogen. Plus,the CBD plant had started showing signs excess nitrogen so I figured they all needed less nutes. I think it was too little for too long. I'm bumping the nutes back up and will aim for 1050-1100 and see how they do. Man,growing cannabis is a constant challenge...keeps the brain sharp though.
The Kush plant still has curled fan leaves and her new growth is slow,curly and weak. Not sure what went so wrong with her since the other plants didn't react so extremely to the early-mid veg nutes. I followed Dr. Coco's nutes guide. I followed the same guide for the auto I grew last cycle and that plant did great (I got five ounces from her!).
Here's some shots of the mailines
Can't wait til they get flipped to flower and really take off.
I'm flipping to flower today. Finally! I waited until they recovered from the mainline toppings. They've had some vigorous growth the past two days, so they seem ready. I've got the inflow EC up to 1200 and they look like they could use a little more, so I'll give full strength from now on (following Dr. C's chart).
They have tons of leaves but only three to four nodes on each stem.
I've been doing LST every few days to keep the canopy even (although I mostly left the Kush plant alone...she's the back left corner). My main light is a KIND led (it's the blurple light) and it has very little depth, so I like to keep the canopy wide and short. I'm not sure what these plants will do during the stretch. Like I said, I've only mainlined once before and it was years ago, so I feel like I'm in uncharted water.
I haven't been this excited to flip to flower in a long time. The newness of the training technique plus the auto-feed system is making this grow really fun for me.
It's been a week since the flip. Plants are growing well. I did some lollipopping yesterday. I took a few too many fan leaves off Girl Scout Crack but I think she'll be fine. I took off the first little shoots (or side branches) of each main stem too. That left about four or five nodes on each main branch.
Here's the plants before pruning
Here they are after
Here's a shot of GSC. I figure there are four fan leaves I took that should have stayed.
I did a foliar feed of SCD probiotic and Yucca extract after I did the pruning. I think it helps them recover. The fan leaves I took were larger than my hand. I'm loving these plants! I'm really loving the auto-water system. I could have used this years ago. Through the years, I've done hundreds and hundreds of trips back and forth between my kitchen and garage.
Even the sad kush plant is looking happier and doing well for having been so stunted. Her leaves used to be curled and they're uncurled now, for the most part.
Now I'm just waiting for pistils. Excited to see what they do in flower!!
Flowers have arrived! I swear I saw the first pistils yesterday and today there are already flowers.
pic of the filling-out canopy:
Gelato (front left in tent) has the biggest flowers. She’s a gorgeous plant. She’s under my quantum board, which is a superior light to the KIND led.
I was wishing I had one more quantum board because the front-right and back-left corners seem to be struggling since they’re getting less light. I had an epiphany! I realized I can use my veg-tent quantum board. I won’t need it until towards the end of flower. By using it now, I can get more even light over the canopy & more energy to make larger flowers. The light spectrum of the veg quantum board is more green , so it’s not perfect for flower. I’ve read some posts online of people flower under this light & do just fine. Plus the other lights in the tent might help the color spectrum.
This pic shows the burnt out part of my big LED and why another light was a good idea over my Girl Scout Crack, front-right:
Seems like there’s no more vertical growth. They didn’t get too tall and the canopy stayed pretty even. I continued LST during the stretch but I had to stop when I ran out of horizontal space. Plus I wanted to keep the canopy as much under the center of the lights as possible.
Inflow EC is around 950-990. Tip burn happens any higher. Only fertigating twice daily but with more than 20% runoff. Outflow EC is same as inflow.
flowers are looking good. Nice node spacing:
I like the spacing of the mainlines:
air pots seem to be growing what looks like mold? There’s salt buildup on the outside and what looks like gray spots. Can’t tell if the gray spots are fuzzy because the pots are kind of fuzzy. This has never happened to me before. I’m thinking of spraying peroxide/water mix on the outside of the pots.
Just switched to mid-bloom nutes yesterday. The heat is rising in my garage, unfortunately. The tent is staying around 82-84F. Hopefully the tent won't get much past 90F the summer. It usually only gets that hot for a few days a year here. I bought some garage door insulation I can apply and I can better insulate my garage ceiling. I just have to find the time to actually get those projects done.
The flowers are looking nice and filling out. There's tip burn from early in flower when I had the inflow EC too high. The tip burn might get a bit worse in this heat. I noticed some wavy edges on the leaves from the heat too. Humidity is around 60-64%. Inflow EC is between 970-1030.
Gelato and the CBD plant have much larger blooms than the GScrack or Kush. Probably due to differences in the strain but I can't help admiring Gelato and the CBD plant more than the other two. Gelato has been one of my favorite plants of all time to grow. She smells amazing too.
I found it hard to get good photos. Here's the best I got:
Well, the Kush plant has been foxtailing. I thought something was up with her because her flowers were getting taller, rather than fatter. Turns out I had the light over her and the CBD plant too close to the canopy. It was at 18" and it should be at least 21" away. I raised the light to 23" so hopefully she'll be less stressed. The CBD plant is fattening up but is showing slight foxtailing too.
Foxtailing has been my nemesis on so many of my grows. It's either the light is too close (the KIND led is an intense light and I've found it difficult to work with the entire time I've grown) or there has been root stress from improper watering....or both have been going on in the past.
The plants under the quantum boards are happy campers.
Some pics of the canopy and the fox tailed kush:
If you zoom in on the canopy pic, you'll see how tall and skinny the kush plant is, in comparison to the rest of the colas. Poor kid, she's been through so much.
Colas are putting on weight but look like they're stressed out even further. I raised the KIND LED and the quantum boards (the two plants under the QB looked fox-tailed the past couple of days). Temps never got above 85F. When I checked on them today, there was a pretty large pollen sack on the Gelato plant. Dang it!!! I felt like shaking my fist at the sky and yelling NOOOOOO! I pulled it off immediately.
I'll have to pull all the plants out tomorrow and search for more sacks. There's only about three weeks left of flower, so hopefully they won't get too seedy?
The flowers look like they've been crossed with an alien species when they foxtail.
There has been some leaf die-off recently. The past few weeks have been so busy, I haven't been checking runoff EC, so there could be salt buildup I'm not aware of. I don't know if the amount of salt on the side of my fabric pots is normal (see pic below). Seems more than usual but I've been growing in gray fabric pots that don't show salts as well as black.
I'm going to scrub the drip trays tomorrow when I have the plants pulled out. I'll hand water them and get a runoff EC reading, after the trays are clean. There's tip burn on the leaves, most of that came from the beginning of flower when I was giving too high inflow EC. The tip burn has progressed a little lately, maybe due to heat (or possible salt buildup).
I'll report back when I've done a runoff reading.
First off, I'm pretty excited I won a grow light from the SAFC! I haven't won anything since the school Halloween fair in 3rd grade. I've been frustrated with my main grow light, so this is major. I've signed up for the plant training grow challenge, so I'll be chronicling my new light adventures there. Can't wait!
Second, I found out the likely cause of the foxtailing....freaking mold. I had previously sprayed the outside of my pots due to mold growth. I should have known to keep a closer eye on that. I've been using Hydrogaurd and SCD probiotics in my reservoir. I just switched to hydrogen peroxide and grapefruit seed oil extract. I think I'll go that route in my future grows as well. The SCD says it can be used in hydroponics but I've been wondering if it's meant for coco.
I added another fan around the root zone in the tent. I'm going to feed just once a day for a while, but with twice the runoff. I'm thinking a longer dry-put period will be helpful, especially since the RH in the tent hovers around 60%.
I took the plants out of the tent to spray the pots with peroxide and search for pollen sacks (no more found, luckily). I love seeing the plants out of the tent. Here's the Gelato. She looks so much larger out in "the wild" (i.e. my garage).
Hopefully the mold will subside and the plants will hold on until they ripen. Fingers crossed.
I heard a knock on the door this morning and I knew it was my grow light from Dr. Coco (the Mars Hydro TSL 2000 I won in this challenge). It's an awesome light...basically a large quantum board. Just when I needed a new light, too!
I took down my two quantum boards, since I need those for veg. For now, I'm hanging the TSL 2000 with my KIND led. I'll probably use the TSL2000 with my two small quantum boards when my next batch is ready for flower. That will be a cool set up...4x4 coverage of bright-white LED. No more blurple!!!
I enlisted help from the Hubs to hang my new TSL. It was pretty easy since it's lightweight. I've heard people set the drivers outside the tent, so that's what I did. Glad the heat from those things won't be inside with the girls. The driver cords plug in each end of the light and they had just enough length to reach both sides.
Here's a shot of the drivers. I have them propped up on two buckets and a plastic storage container because I'm a pro. I even lined the plastic storage container with a sheet of tile I had in my garage.
I had to take a selfie with the light since it was autographed by MJ Coco (I'm a weed geek). I also got this CFC poster. It's in a place of honor in my garage, along side my grow tents. I'm thrilled I won! It's going to be fun watching the next batch of plants thrive under this light. Thanks Dr. Coco!!
I chopped the Gelato plant yesterday. I'm flushing the other three for a few days, then I'll finally be done with this grow. This grow has taken way too long!!!! Delays stemmed from mistakes in veg.
These plants might be my most foxtailed plants ever. All but one of my grows have foxtailed for the past year and a half. Good news is I think I've figured out the cause, so I can stop doing that on future grows. The probiotic I've been using says it's good for soil and hydroponics. I think it isn't good for coco. It's caused pretty significant mold this grow and I bet it's caused mold that I didn't see on my previous grows. If I'm right, I've finally figured out what has been causing my main grow issues for the past year and a half. I've been so frustrated with my stresses out plants, not knowing why.
Anyhow, here's a pic of the Gelato. She got some pretty colors at the end:
